Recently I’ve designed and built a simple yet very nice playing guitar amplifier.
I’ve designed it keeping in mind that I don’t wanna distortion: it’s a specialized amplifier for playing contry music, blues and clean.
To reach this goal I have to minimize the overloading of the first input stage and keep low the overall gain.
I’ve choosed for this role an high-current low noise single triode tube tought by constructor to be used as preamplifier in audio stages with resistor-capacitor coupling.
The second stage it’s based uppon a dual triode – medium gain tube for UHF radio band receiver use with internal shield. It’s second triode is used as phase splitter that drives a couple of EL84 power tubes in class B.
Here the details, schematic and notes as PDF file. Building NOTES
I’ve used the following russian tubes:
- 6C3П-ЕВ (6S3P-EV) equivalent of EC86 as first input stage
- 6Н3П-ЕВ (6N3P-EV) equivaent of 2C51 as voltage gain stage and phase splitter
- 2x 6П14П (6P14P) equivalent of EL84 as push pull output stage
The transformers are home made, home caculated, self winded. I’ve used oriented grain EI core to limit power loss. The low range cutoff frequency of output transformer is calculated for 100Hz. Primary fractioning it’s a secret.